ASME B16.5 · Class 600
ASME B16.5 slip on flange used on the flanged connections of pipelines in Class 600. Supplied in carbon steel, stainless and alloy grades, from stock or project-specific.
Piyasada 600 libre olarak da anılır; ASME ve ANSI B16.5 aynı ölçü tablosunu kullanır.
| Product type | Slip On Flange |
|---|---|
| Standard | ASME B16.5 |
| Pressure class | Class 600 |
| Size range | 1/2" – 24" |
| Material | ASTM A105, A350 LF2, A182 F304/F304L, F316/F316L, F11, F22 |
| Facing | RF / FF / RTJ |
| Certification | EN 10204 3.1 / 3.2 |
Selection and ordering notes
In a slip-on flange the pipe slides inside the flange and is held by inner and outer fillet welds. Alignment tolerance is generous and fabrication is easier, but the weld root meets stress more abruptly.
It is common on low and medium pressure water, air and general service lines. The inner weld must not be skipped, otherwise the root area stays exposed to corrosion. RTJ faces are frequently specified from class 600 upwards, and gasket and stud selection must follow that form. See weld neck or slip-on for the details.
