ASME B16.5 · Class 300
ASME B16.5 lap joint flange used on the flanged connections of pipelines in Class 300. Supplied in carbon steel, stainless and alloy grades, from stock or project-specific.
Piyasada 300 libre olarak da anılır; ASME ve ANSI B16.5 aynı ölçü tablosunu kullanır.
| Product type | Lap Joint Flange |
|---|---|
| Standard | ASME B16.5 |
| Pressure class | Class 300 |
| Size range | 1/2" – 24" |
| Material | ASTM A105, A350 LF2, A182 F304/F304L, F316/F316L, F11, F22 |
| Facing | RF / FF / RTJ |
| Certification | EN 10204 3.1 / 3.2 |
Selection and ordering notes
A lap joint flange comes in two pieces: a stub end welded to the pipe and a loose flange rotating over it. Bolt holes align easily, which shortens assembly on lines that are opened often.
On expensive alloy lines only the stub end in contact with the fluid needs to be alloy, while the backing flange can be carbon steel, which reduces cost. Class 300 means a thicker body and a larger bolt circle than 150# at the same size; it is the standard class for medium pressure process lines. See flange types guide for the details.
